@article { author = {shafiei sabet, behnam and mosapour, farkhondeh and moussavi, seyed Ali}, title = {Laboratory Investigation Hydraulic Performance of Grate Inlets in Urban Storm Water Networks}, journal = {Iran-Water Resources Research}, volume = {13}, number = {3}, pages = {159-167}, year = {2017}, publisher = {Iranian Water Resources Association}, issn = {1735-2347}, eissn = {2476-7360}, doi = {}, abstract = {In the past decades many of Iran northem cities due to located in the temperate climate have been always exposed intense rainfalls ,The adverse effects are of the flooding streets, pedestrian and vehicle traffic problem and damage to the public and private property. one of the causes of this situation is the hydraulic performance of grate inlets in storm water networks and clogging them. in this article, hydraulic performance of grate inlets common in urban storm water networks and impact strap angle in discharge coefficient and hydraulic efficiency is studied. built in both the longitudinal and transverse arrangement of straps and in grate inlets is used from 5 straps different angles and two conduit main cross slop. Also to evaluate the effect of flow rate in flow interception were used from 6 different discharge. The results of 120 series of experiments showed that the straps longitudinal arrangement than traverse arrangement are grater from discharge coefficient and hydraulic efficiency and increase rate discharge coefficient in straps longitudinal arrangement than traverse arrangement in the state without transvers slops and terrain slops 2 percent is respectively 52-70 percent. In condition without travers slope 45 strap angle in to length and traverse strap grate inlets from more discharge coefficient in comparision with remnat are fruition Although straps angle has a negligible impact on the discharge coefficient .Also increasing discharge will reduce grate inlets hydraulic performance.}, keywords = {Urban Flood,Straps grate inlets,Straps angle,Discharge coefficient,hydraulic performance}, title_fa = {بررسی آزمایشگاهی عملکرد هیدرولیکی دهانه های آبگیر مشبک تسمه ای در شبکه های سیلابروی شهری}, abstract_fa = {در دهه‌های گذشته بسیاری از شهر‌های شمالی ایران به‌دلیل قرار گرفتن در اقلیم معتدل همواره در معرض بارندگی‌های شدید قرار داشته‌اند که از مهم‌ترین اثرات نا‌مطلوب آن‌ها آب‌گرفتگی معابر شهر‌ها، اختلال در عبور و مرور عابرین پیاده و وسایل نقلیه و ورود خسارت به اموال عمومی و خصوصی بوده است. یکی از علل بروز آبگرفتگی، عملکرد هیدرولیکی نا‌مناسب دهانه‌های آبگیر در شبکه سیلابرو و انسداد و گرفتگی آن‌ها است. در این مقاله عملکرد هیدرولیکی دهانه‌های آبگیر مشبک تسمه‌ای رایج در شبکه‌های سیلابرو شهری و اثر زاویه قرار‌گیری تسمه‌ها بر ضریب تخلیه و راندمان هیدرولیکی مورد بررسی قرار گرفته است. دهانه آبگیر مشبک در دو آرایش تسمه‌های طولی و عرضی ساخته شده و در ورودی آبگیر مشبک از 5 زاویه مختلف تسمه و دو شیب عرضی مجرای اصلی استفاده شد. همچنین اثر شدت جریان بر میزان آبگیری با اعمال 6 دبی مختلف مورد بررسی قرار گرفته است. نتایج 120سری آزمایش نشان داده است که آرایش طولی تسمه‌ها نسبت به آرایش عرضی از ضریب تخلیه و راندمان هیدرولیکی بیشتری بر‌خوردار است و میزان افزایش ضریب تخلیه در آبگیر‌های تسمه‌ای طولی نسبت به تسمه‌ای عرضی در دو وضعیت بدون شیب عرضی و با شیب عرضی 2 درصد به‌ترتیب 52 و 70 درصد می‌باشد و اگرچه زاویه قرار‌گیری تسمه‌ها تاثیر ناچیز‌ی بر ضریب تخلیه دارد زاویه تسمه 45 درجه در میان آبگیر‌های تسمه‌ای طولی و عرضی عملکرد بهتری دارد. همچنین با افزایش دبی، راندمان هیدرولیکی آبگیر‌های مشبک کاهش می‌یابد.}, keywords_fa = {سیلاب شهری,دهانه‌ آبگیر مشبک تسمه‌ای,زاویه قرار‌گیری تسمه‌ها,ضریب تخلیه,راندمان هیدرولیکی}, url = {https://www.iwrr.ir/article_43786.html}, eprint = {https://www.iwrr.ir/article_43786_28e21643ca2b868876cae06771e9b0c1.pdf} }