@article { author = {Shafieefar, M and Valizadeh, A}, title = {Land-Water Interface Modeling Using a Two-Dimensional Shallow Water Model}, journal = {Iran-Water Resources Research}, volume = {4}, number = {1}, pages = {50-58}, year = {2008}, publisher = {Iranian Water Resources Association}, issn = {1735-2347}, eissn = {2476-7360}, doi = {}, abstract = {In this paper the H2D shallow water model is developed which employs terms like atmospheric pressure, wind stresses, tidal forces, and boundry friction status. Adding the algorithm of wetting and drying in boundry cells, along with the changing wind and pressure fields, a new model called Surge2D is developed. The numerical 2D model developed in this study estimates the shallow water currents. The land-water interface is treated as a moving boundary in which the flooding and draining rate depend on the both simulated current and the height of water in adjacent ‘wet’ cells. This ensures realistic and smoothly varying results. In this approach for the status of a boundary cell to change from dry to wet or wet to dry, the water level should become greater or less than a specified stage, respectivly. Furthermore the fluid must cross the length of the boundary cell according to the flow velocity in the adjacent cell. The results of this model were compared to both analytical solutions and MIKE21 results. The result of the 2D model indicated an excellent agreement with the analytical solutions (differences less than 0.1%). This model is used to study the effects of Shahid Kalantary causeway on the current pattern and characteristcs in UrmiaLake, in north-western Iran.}, keywords = {Shallow water,Numerical Model,Dry-wet boundary,Urmia Lake}, title_fa = {مدل‌سازی تر و خشکشدن مرز در مدل دوبعدی جریان آب کم عمق}, abstract_fa = {در این تحقیق مدل دوبعدیH2D  که مدل جریان آب کمعمق است و ترمهای گرادیان فشار جو، تنشهای باد، نیروی جزرومدی و اصطکاک کف و دیواره را دارد، توسعه داده شده و با اضافه کردن الگوریتم تر و خشک شدن مرزها، میدان باد و فشار متغیر و شبکه مستطیلی متغیر به آن، مدل جدید Surge2D تهیه شده است. الگوریتم مورد استفاده، هم سرعت جریان و هم ارتفاع آب را برای بررسی تغییر مرز به کار میبرد. در این روش  برای تغییر وضعیت یک المان مرزی از حالت خشک به تر یا برعکس،‌ به ترتیب باید ارتفاع آب از یک مقدار حداقل بیشتر یا کمتر باشد و علاوه بر آن  سیال آب با توجه به سرعتی که در المان مرزی دارد،‌ طول المان را طی کند. در نتیجه مدل‌سازی واقعیتری نسبت به مدل‌های پیشین مثل Mike21 امکان‌پذیر است. نتایج اجرای مدل با حلهای تحلیلی تفاوتی بسیار اندک، در حدود 1/0 درصد را نشان میدهند. این مدل برای بررسی تاثیر احداث میانگذر شهید کلانتری برخصوصیات جریان در دریاچه ارومیه مورد استفاده قرار گرفته است و تغییرات الگوی جریان در دریاچه ارومیه پس از احداث میانگذر ارایه گردیده است.  }, keywords_fa = {آب کم عمق,مدل عددی,مرز خشک و تر,دریاچه ارومیه}, url = {https://www.iwrr.ir/article_15630.html}, eprint = {https://www.iwrr.ir/article_15630_3fd18bb962c740a12e6f0290c8de48e3.pdf} }